xdm trigger kit

by mhead on Mon Feb 08, 2010 5:49 pm

Any body have any reccomendations on a gunsmith in the jackson area to install a trigger kit on my xdm ? What would something like that cost ball park ?

by Joe S. on Mon Feb 08, 2010 6:36 pm

Is this a carry weapon? If so, I'd advise against modding the trigger. Legal stipulations could result should you use it in a SD situation...

That being said, Van's uses a gunsmith out in Utica somewhere. You can drop the gun off there or maybe they could get you in touch with him.

by msredneck on Mon Feb 08, 2010 7:44 pm

Broken Record...

Billy Tierce

Their a sticky for Central, MS gunsmiths....both mentioned are very good

by oilfield trash on Mon Feb 08, 2010 9:00 pm

I honestly don't get the "legal" thing people bring up about moding your trigger. regardless if it has a factory trigger or modified trigger, self defense is self defense.

by Joe S. on Mon Feb 08, 2010 11:15 pm

All you need is one bleeding heart lawyer (and we all know there are plenty) to say you had the gun modded into a killing machine and could somehow sway the jury to see you as a cold blooded killer instead of a victim protecting himself. I agree it sux. SD should be just SD, but it aint worth my freedom and right to keep and bear arms to chance what lawyer the person (or their family) gets to sue me for protecting myself. But that's just me...

by Joe S. on Mon Feb 08, 2010 11:19 pm

Sorry to hijack the thread. I won't any more! Promise. Smile

by mhead on Tue Feb 09, 2010 8:48 am

That's cool, but no it's my IPSC pistol.

by mhead on Tue Feb 09, 2010 9:53 am

Broken record . . . I was lookin for somewhere closer , I read the sticky before I posted . Also was wonderin if anybody had this done and how much it cost em . Any info about XDM triggers would be helpfull. I don't think I want to do it myself, I dont know much about anything but 1911'S.

by **Xd357** on Tue Feb 09, 2010 10:42 am

Have you talked to glen whitfield?

by oilfield trash on Tue Feb 09, 2010 11:20 am

I have been looking at sending my XD9SC to springfield for a trigger job and night sites. I know you're probably not wanting to go that way, but I can do without that XD for that long. I just know no one else will know the xd better than the guys at springfield.

by mhead on Tue Feb 09, 2010 1:30 pm

No, I don't know Glen Whitfield . I don't want to send it off I know that is probly the best way to do it but I need it for matches once sometimes twice a month. Where is Glen Whitfield ?

by Joe S. on Wed Feb 10, 2010 11:22 pm

Was told today surplus city does all their gunsmithing inhouse. Also swanns gun and repair does some work.

by nonnieselman on Thu Feb 11, 2010 9:32 am

the trigger kits for the XD and XDM is very easy to install and do it yourself.
I had not done all that much to my XD Service but polish the engagement faces..

Bought the Springer Precision Trigger kit and fitted it myself. only took about 2 hours Very Happy

its fun to learn how to do that kinda stuff, i know how the gun works inside and out now.

by Methos on Mon Feb 15, 2010 8:50 pm

+1 on the springer kit. I put one in mine too. I got the kit that has a pre-polished sear, so all I did was replace parts and take about 20 file swipes on the trigger bar to "fit" the trigger travel. Its a no brainer once you see and understand how the trigger bar functions - its hard to mess it up. You'll get about a 3 to 3.5lb trigger - just right.

$150.00 and an hour or so of your time.
http://www.pistolgear.com/proddetail.php?prod=05SSC
http://www.pistolgear.com/proddetail.php?prod=05SSD

by dhollis51 on Tue Feb 16, 2010 9:47 am

Swans gunsmith on old canton right past the post office on the right..

xdm trigger kit

xdm trigger kit

Re: xdm trigger kit

Re: xdm trigger kit

Re: xdm trigger kit

Re: xdm trigger kit

Re: xdm trigger kit

Re: xdm trigger kit

Re: xdm trigger kit

Re: xdm trigger kit

Re: xdm trigger kit

Re: xdm trigger kit

Re: xdm trigger kit

Re: xdm trigger kit

Re: xdm trigger kit

Re: xdm trigger kit