38 special loads with Solo 1000

Accurate Arms the maker of Solo 1000 states that the powder can be used for 38 special loads.

None of my books had any info...nor did their web page so I emailed them

This was the reply...Quite a wide range for a starting and ending load...so it may have potential...Both loads are lead cast bullets

Caliber: .38 Special.
Barrel length: 4”
Powder: Accurate – Solo 1000®.
Bullet weight: 110 grains. Ca 1.442”
Low load: 3.6 grains (825 – 875 Ft/p/sec)
Midrange load: 4.1 grains (925– 975 Ft/p/sec).
Maximum load: 4.5 grains (1000 – 1075 Ft/p/sec).


Bullet weight: 158 grains. COL ca 1.520-1550”
Low load: 3.0 grains (700 – 750 Ft/p/sec)
Midrange load: 3.4 grains (760 – 825 Ft/p/sec).
Maximum load: 3.8 grains (875 – 925 Ft/p/sec).


NOTES:
It’ important to note that SAFETY is our prime concern therefore we strongly recommend.
1. TO ALWAYS BEGIN LOADING AT THE RECOMMENDED MINIMUM “START” LOAD and develop loads in 2% increments towards the MAXIMUM load.
2. CAUTION: Beware of double charging if the loading density is below 50% of the available volume.
3. If possible, measure the velocity and correlate with our data.

Regards
Johan Loubser
Ballistician
Ramshot.Accurate Powders
Tel: 406.234.0422 email: johan@ramshot.com
WesternPowdersInc.Miles City.Montana.
COMPANY WEBSITES/PRODUCTS:
www.ramshot.com
www.accuratepowder.com
www.montanaxtreme.com
www.blackhorn209.com

Tried 3.5 Grains Solo 1000 in 38 special tonight with a 110 Gr lead wadcutter seated flush.

Very soft...good accuracy and what I really like....clean burning

Gun was a 4 inch S&W Model 686