Requirements to get new endorsements on ccp
Page 1 of 1 • Share •
Requirements to get new endorsements on ccp
Finaly found a gruop I can hang with, glad to be apart of Msgunowners . H
ey, whats the deal the governer signed
a new admendment to the CC law and require a later writing of the regs. Does anyone know where these are in print?
ey, whats the deal the governer signeda new admendment to the CC law and require a later writing of the regs. Does anyone know where these are in print?
riverwalker- New Member

- Posts: 19
Join date: 2011-08-11
Age: 52
Location: Covington County
Re: Requirements to get new endorsements on ccp
Uh, probably the wrong place for that question, but

Mr. Squirrel- Veteran Poster

- Posts: 382
Join date: 2011-08-08
Age: 39
Location: Jackson
Re: Requirements to get new endorsements on ccp
Welcome Aboard

mildot- Distinguished Poster

- Posts: 1565
Join date: 2010-03-29
Age: 59
Location: Hinds County
Re: Requirements to get new endorsements on ccp
Can't answer the question, but welcome to the forum!

jbpmidas- Contributing Member

- Posts: 7176
Join date: 2009-05-21
Age: 33
Location: Amory, MS
Re: Requirements to get new endorsements on ccp
welcome aboard, check out the HB506 section and there is plenty of info there and might get a better response to your question.

dhollis51- Distinguished Poster

- Posts: 4921
Join date: 2009-04-16
Age: 36
Location: Brandon, Ms
Re: Requirements to get new endorsements on ccp
Have to get permission to view Round table. PM hammer for permission.
And welcome aboard!
http://www.msgunowners.com/f52-hb-506
And welcome aboard!
http://www.msgunowners.com/f52-hb-506

CAJNFRND- Veteran Poster

- Posts: 449
Join date: 2010-03-11
Age: 45
Location: Stone County

Jharmon- Veteran Poster

- Posts: 308
Join date: 2010-05-20
Age: 21
Location: ocean springs, ms
Re: Requirements to get new endorsements on ccp
Follow the link provided by CAJNFRND and

M1GarandFan- Distinguished Poster

- Posts: 2000
Join date: 2009-06-01
Age: 41
Location: Clinton, MS
Re: Requirements to get new endorsements on ccp
and
to MSGO
PapaDawg- Distinguished Poster

- Posts: 1003
Join date: 2010-01-13
Location: Brandon
Re: Requirements to get new endorsements on ccp
Welcome from Brandon!!!

22lrfan- Distinguished Poster

- Posts: 2478
Join date: 2010-08-31
Age: 53
Location: Brandon
Re: Requirements to get new endorsements on ccp
In Mississippi a battle is shaping up between lawmakers who approved a law signed by the Governor, and the bureaucracy charged with enforcing it.riverwalker wrote:Finaly found a gruop I can hang with, glad to be apart of Msgunowners . Hey, whats the deal the governer signed
a new admendment to the CC law and require a later writing of the regs. Does anyone know where these are in print?
Critics say the Department of Public Safety wants to put its own spin on the law, and they claim that's unconstitutional.
This law applies to gun permits and where qualified persons can carry concealed weapons.
Lawmakers made their intentions clear in the law, signed by Governor Haley Barbour, but the Department of Public Safety, charged with enforcement, seems to have a different view.
A new law in Mississippi now gives him the right to carry a concealed weapon in Courthouses, City Halls, and Church if the person's had special training from an NRA instructor or another nationally-recognized organization.
Lawmakers wanted to offer a benefit to gun owners who get additional training.
Problem is, Mississippi's Department of Public Safety, charged with enforcing the new law apparently won't recognize it.
Oxford Attorney Reed Martz ran across the problem when he checked with DPS. "They have not followed the administrative procedures law which requires them to publish proposed rules and regulations and take public comment" the attorney said.
He says DPS refuses to recognize any training completed before the law's July first effective date, and has yet to approve any instructors or courses since.
DPS Attorney Timothy Smith says the department decided to design its own training requirement quote: "because of liability concerns".
But Martz and others say the law doesn't provide for that.
The department has had since March 11th, when the governor signed the bill into law, to prepare. .
The three lawmakers behind the bill sent a letter to DPS Commissioner Albert Santa Cruz asking him to implement the law exactly as it was written.
Asked if that changed the department's plans, a spokesman reportedly said, "no".
But I found this on the Mississippi Firearms Permit web site:
Enhanced Permit NRA Instructors
* Clyde Harris Morgan
* Brandon, MS
(601)825-3971
*
* Clifford Lee Cargill
* Byram, MS
(601)906-0162
*
* Harry F. Williams
* Greenwood, MS
(662)299-8218
*
* James "Jim" Howard Brown
* Pearl, MS
(601)966-8414
*
* Joe Marvin Rankin
* Brandon, MS
(601)953-6615
*
* John Martin
* Magnolia, MS
(601)783-6511
*
* Jack Ragsdale
* Lumberton, MS
(601)528-2410
*
* Roy Lee Wall III
* Greenwood, MS
(662)299-8218
*
* Steve Palmer
* Oxford, MS
(901)370-5600
*
* Tom Givens
* Memphis, TN
(901)370-5600

NRA_guy- Distinguished Poster

- Posts: 2245
Join date: 2009-04-25
Age: 65
Location: Vicksburg
Re: Requirements to get new endorsements on ccp
Welcome. You've got a lot of reading to do. Look in the hb506 thread.

Xd357- Moderator

- Posts: 7410
Join date: 2009-08-11
Location: Edwards

Leferd- Veteran Poster

- Posts: 374
Join date: 2011-03-08
Age: 26
Location: Jayess
Re: Requirements to get new endorsements on ccp
_________________
Hold the high ground, but when necessary, be prepared to get down in the mud with them, and show no mercy. -Sidroski

msredneck- Contributing Member

- Posts: 13024
Join date: 2009-04-20
Age: 53
Location: Clinton, MS

Big Sexy- Distinguished Poster

- Posts: 506
Join date: 2010-02-06
Age: 30
Location: Brandon, MS
regulations on ccw permits
riverwalker wrote:Finaly found a gruop I can hang with, glad to be apart of Msgunowners . Hey, whats the deal the governer signed
a new admendment to the CC law and require a later writing of the regs. Does anyone know where these are in print?
I am one of the approved trainers for the CCW Classes. If you send me an email at douglasmbowser@yahoo.com, I will send you a few files that I think will answer your questions.
When carrying in the new places allowed by the law, be sure the police in the area have received the memo. In other words, don't make yourself the first test case. It is expensive. I have asked the McComb City Police Officer and a Pike County Deputy Sheriff about 506 and neither of them have heard about it.
The DPS has backed away from their original position on 506. They originally wanted a 16 hour class and the shooting of 450 rounds of ammo in the course they wanted to approve. Clyde Morgan, Cliff Cargill and I met with some State Officials and voiced the opinion that such a cousre is unreasonable in that the cost would be $200 + $200 for ammo. We also pointed out the law said a firearms course as offered by a Nationally recognized organization. There were other members of MS Gunowners that worked on this issue and we should all be grateful for their efforts.
I did not have any problem getting approved to be an Instructor by the DPS. We have conducted 2 classes in McComb and have another planned for February 3-4, 2012. Most of the issues with the DPS have been settled. I do not make any money for teaching the classes. The fees charged by the gun club are for expenses and to help our Junior Shooting Programs.
Doug Bowser
President
Mississippi State Firearm Owners Association
Secretary
Southwest Gun Club
McComb

Doug Bowser- Distinguished Poster

- Posts: 2624
Join date: 2009-04-20
Age: 70
Location: McComb, MS
Re: Requirements to get new endorsements on ccp
Thanks for joining in!

righttoown- Distinguished Poster

- Posts: 1689
Join date: 2009-06-28
Location: Perkinston, MS
Similar topics» Barbarian Requirements 2K10
» barbarian requirements 3min49 sec by nirose9
» training in paris for bar-barians requirements
» General Question about the Bar- Barian Requirements!!!
» Tech's Bar-barian Requirements
» barbarian requirements 3min49 sec by nirose9
» training in paris for bar-barians requirements
» General Question about the Bar- Barian Requirements!!!
» Tech's Bar-barian Requirements
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum






