Anyone using the RCBS power trimmer?

Anyone using the RCBS power trimmer? If so, what are ya'll lubricating the shaft with? Any comments would be appreciated!!!

Philly60 (Dan)

LOL No one?

If you want to keep dirt acummulation down try spray silicone.It's available through most auto parts stores.

RStewart wrote:I use the manual trimmer. I use the same lubricant I use for resizing. Put a little on the button with a Qtip.

I gotcha, thats exactly what I've been doing but I called RCBS and asked them and I couldn't get a definitive answer

I just use the ole 3-In-One oil on the shaft of my RCBS power trimmer.

PhillipM wrote:Has anyone galled a shaft?

If one were ever gonna gall, it would've been when I trimmed down a few hundred 45-70 brass to 45-60...trimmed .220 off each one. That 3-In-One oil works.

Thanks for all the reply's ya'll. I've been using a chain lube that a friend uses at his shop, supposedly good for any type of light friction. I'll have to go to the shop and look at the can for the name.

I use super lube synthetic grease.
Little messy, but works well for me.